Fiber Optics Communication. Gain Enhancement of Erbium Doped Fiber Amplifier using Amplified Spontaneous Emission

Masters Thesis from the year 2019 in the subject Instructor Plans: Computing / Data Processing / IT / Telecommunication, course: M.Tech, language: English, abstract: With the evolvement of high speed and long-distance data communication systems, conventional band erbium-doped fiber amplifiers (C-EDFAs) are getting more attention in recent times. Major advantage of the C-band EDFA is that it provides the user to realize a system with wide bandwidth of 40 nm. But, from the reported works, it is evident that for Gain enhancement in C-band using EDFA is reported with the use of multiple stages, multiple pumps, Gain flattening filters etc. However, these techniques suffered from high cost, complex techniques, and low performance. Here enhancement process was done through the narrowband Fiber Bragg Gratings (FBG) or fiber reflectors mirrors. In this work, a conventional band erbium doped fiber amplifier is proposed with high gain and less noise figure by incorporating the two fiber bragg gratings (FBGs) for amplified spontaneous noise reinjection. Maximum ASE is emerged at 1565 nm for the at -55 dBm carrier powers. Maximum gain is found out to be 48.16 dB with noise figure of 5.29 dBm. Fiber amplifiers are crucial and fast-growing field in the communication system. The study of this field show that the formulation procedures of lasers generation and amplifier amplification displays a problematical process due to the factors affecting and changing amplifier and laser significances in a dynamic way. Gain, noise figure, wavelength, power flatness and power output are directly affected by any element or parameter inside the amplifier configuration. The design parameters such as: erbium ions concentration, EDF length, isolators, wavelength division multiplexing (WDM) position, pump power position, circulators, pump directions, all of these elements and factors are affecting directly the amplifier output. EDFA is an amplifier that is best used because of its low loss and h